«

»

The “go shack” with DMR

I took this picture weeks ago but never managed to get it up here.  The “go shack” has been updated (as noted below) with the TYT MD-9600, replacing my Kenwood GMRS rig that I think may have bitten the dust anyway.

(The SignaLink is collywobbled because the bolts holding the FT-7900D in place stick up from below the shelf.  I have a plan to deal with that at some point, by simply installing a wood spacer beneath the SignalLink with holes in it to clear the bolts.)

This is, for what it’s worth, the cleanest you will see my shack desk until I build the new one that will have about twice as much square footage.

Another planned change will remove the power supplies from the top of the rack so speakers and other things (maybe including the Kenwood GMRS mobile, if its finals haven’t actually bitten the dust) can be installed.  The power supplies will go into a 2U Gator box that’s collecting dust under the desk at the moment, and the interconnect will use two sets of 75A PowerPoles that are also sitting around collecting dust.  The intent is to be able to take the go shack in the car and run it off of battery power without having to lug the heavy power supplies along with it (and I will make up a heavy cable with a splitter on the radio end for that purpose).  For normal operations, or operations with generator or utility power, the power supplies can then be brought along and hooked up separately.

Anyway, that’s for the future when I actually have time to tear the box down to that extent.